Customizer for the DLX Luxe AIRE · firmware 1.37Your marker. Your screen.
Put your own logo on the boot screen, play your own animation at power-on, move or hide what the main screen shows, and load your own power-on sound. From your browser, over the USB-C cable.
Chrome or Edge on a computer. You see the exact result before anything is written.
Tested on a real Luxe AIRE: boot logo, boot animation, screen layout and custom sound.
What you can change
01
Boot logo
Swap the emblem for your team logo or your number, in the colour you pick. It shows at power-on and power-off.
02
Boot animation
Add frames before the logo: your name, your number, a countdown. Each frame gets its own colour.
03
Main screen layout
Move the sensor eye, the name strip, the firing mode, the shots per second and the battery up or down. Hide the ones you never look at.
04
Your own drawings
Place logos or text anywhere on the main screen, each in its own colour. Drag them where you want them.
05
Your own sounds
Replace what the marker says at power-on, or any of its 91 phrases, with your audio. It goes to a spare voice bank: the factory voice stays.
06
Exact preview
The editor runs the marker's own drawing code in your browser. What you see is what the screen will paint, pixel for pixel.
How it works
- 1
Bring the official firmware
Open DLX's public firmware file, copy it and paste it into the editor. No account, no install, only the first time: the browser remembers it.
- 2
Design
Logo, animation, layout, sound. The preview updates as you go.
- 3
Connect and rehearse
Plug the marker in while it is off. The editor first runs the whole write against a simulated marker.
- 4
Write and check
About 25 seconds for the screen, a few minutes for sound. Unplug, power on, and look.
Built not to break your marker
The bootloader is never touched
The editor only writes the application area, with the same sequence as the official updater. If something looks wrong, plug it in again and write the official firmware back.
Firing stays as it is
Nothing here changes dwell, rate of fire, ramping or any firing mode. Only pictures, positions, colours and sounds.
Sound is verified byte for byte
Everything written to the voice memory is read back and compared. The factory voice in bank 1 cannot be written from here.
One honest limit
The marker does not let anyone read its program back, so a screen write cannot be compared afterwards. The proof is the marker powering on with your design.
Free to try. One payment to own it.
Free
$0
- Your text on the name strip of the main screen
- The whole editor and the preview, painted by the marker's own code
- Write the official firmware back any time
- Backup of the marker's settings
Pro
$19one time
- Your own boot logo: a picture or text, in your colour
- Boot animation: your frames, or a GIF found right in the editor
- Move, hide or recolour every piece of the main screen, add your drawings
- The power-on screen: move the logo, drop "PWR ON", add drawings
- Your own sounds in a spare voice bank, written in seconds
- Silence any phrase: the marker skips it, no gap
- Everything written in one go
Pro is a one-time payment for one marker. Buy from the editor and it unlocks by itself; the licence key also arrives by e-mail. No subscription.
Start freeQuestions
Which markers does it work with?+
The DLX Luxe AIRE. Firmware 1.37 is the one it was written and tested on; on another build of the AIRE firmware the editor first proves, in your browser, that every routine and every spot it changes is where it expects, draws the screens with that firmware's own code and tests a full design, and only then lets you write. If anything does not match exactly, it refuses. Other Luxe models are not supported.
Does one key work on several markers?+
No. A key unlocks one marker. The marker has no serial number the editor can read, so the first write with Pro saves an ID in a spare corner of its voice memory and the key is tied to that ID, on any computer. DLX's own voice tool erases that corner: write to us and we move your key.
Why do I have to bring the firmware?+
The marker does not let anyone read its program, and the firmware belongs to DLX, so we do not host it. You open DLX's own public copy, copy it and paste it into the editor: no account and no install. It stays in your browser and is remembered for next time.
Can I go back to factory?+
Yes. Write the official firmware file back from the same page. For sound, pick the factory voice again in the marker's voice menu.
Can I put a photo or a video on the screen?+
Not today. Every drawing is one colour: logos, text and simple shapes work well. Photos and video would need far more than the marker's processor can push to the screen.
How long can my sound be?+
A voice bank holds about two minutes in total. With every factory phrase kept, around 24 seconds are free. The speaker is small and the audio is 8-bit: voices and simple melodies come through, bass does not.
Is it legal in tournaments?+
The tool does not touch how the marker fires. What a league allows on a screen is the league's call: check before you turn up with a changed mode label.
Does it work on a phone?+
No. It needs Chrome or Edge on a computer, because that is where browsers can talk to USB devices.
Make it yours
Open the editor, load your firmware file and see your design on the screen before you write anything.
Open the editor